.product_div_lie_right
Products
Products

Luoke Cyanoacrylate glue is new developed alpha-cyanoacrylate, loctite equivalents, suitable for fast bonding of most materials such as metal, rubber, plastic, glass, leather, wood, ceramics and other.

Luoke cyanoacrylates characteristics:
  • Fast curing within a few seconds
  • Single component, easy to use
  • High bonding strength
  • For bonding a variety of materials
  • little odor, low albefaction
  • good temperature resistance

LK401 ( loctite 401 equivalent )

LK401 is a low viscosity, fast curing, single component cyanoacrylate adhesive. It is specifically formulated for difficult to bond substrates and is less dependent on surface moisture for cure speed than other standard CA grades. 20 gram bottle. 
Typical Use: Used for rapid bonding of a wide range of metal, plastic or elastomeric materials, particularly suited for bonding porous or absorbent materials such as wood, paper, leather or fabric.

LK403 ( loctite 403 equivalent )

little odor, low albefaction, moisture resistance, for the bonding of non-precision fitting parts, no need of complex ventilation system.

LK405  ( loctite 405 equivalent )

LK405 Super Bonder is a single component, low viscosity, moisture cure methyl cyanoacrylate adhesive. It is a universal super glue.  

LK406 ( loctite 406 equivalent )

LK406 is a low viscosity, fast curing, single component cyanoacrylate adhesive. It is specifically formulated for difficult to bond substrates. 20 gram bottle. 
Typical Use: Used for rapid bonding of a wide range of metal, plastic or elastomeric materials; particularly suitable for bonding plastic or rubber parts where very fast fixturing is required. 
 
LK410 ( loctite 410 equivalent )

Rubber toughened,medium strength, medium viscosity, fast curing, good impact resistance and resistance to vibration, heat, peeling. Good gap filling.
Typical Use: 
Used for bonding metals, plastics and rubbers that will be subjected to adverse environmental conditions.

LK411 ( loctite 411 equivalent )

LK411 is a single component high viscosity cyanoacrylate adhesive; it has a moisture cure and is heat, impact and peel resistant. 20 gram bottle.
Typical Use: 
Used for bonding rubbers, plastics and metals; suitable for applications where heat resistance is required. 

LK414 ( loctite 414 equivalent )

414 Super Bonder is a single component, low viscosity, moisture cure ethyl cyanoacrylate adhesive with enhanced performance on vinyl and other plastics. 
Typical Use: Used for bonding plastics, rubbers and metal; designed for bonding vinyl plastics to themselves or to metals. 

LK415 ( loctite 415 equivalent )

LK415 Super Bonder is a single component, high viscosity, moisture cure methyl cyanoacrylate adhesive. 
Typical Use: 
Used for bonding plastics, rubbers and metal; particularly suited for bonding metal substrates. 

LK420 ( loctite 420 equivalent )

LK420 Super Bonder is a single component, general industrial grade cyanoacrylate adhesive; it has a low viscosity for penetrating pre-assembled parts and develops strong bonds. 
Typical Use: 
Used for rapid bonding of a wide range of metal, plastic or elastomeric materials; close mating parts can be aligned and then bonded by penetrating the adhesive into the bond area.  

LK454 ( loctite 454 equivalent )

LK454 is a fast curing, single component gel cyanoacrylate adhesive; the gel consistency prevents adhesive flow even on vertical surfaces. 
Typical Use: Used for rapid bonding of a wide range of materials, including metals, plastics and elastomers; it is particularly suited for bonding porous or absorbent materials such as wood, paper, leather and fabric.  

LK460 ( loctite 460 equivalent )

LK460 is a single component, low viscosity, cyanoacrylate adhesive; it has a moisture cure, low odor and low blooming properties. 
Typical Use: Used to bond metals, plastics and elastomers; it is particularly suitable for applications where vapor control is difficult.
 
LK480 ( loctite 480 equivalent )

Rubber enhanced,medium viscosity, resistance to impact, vibration, peeling and heat.
Typical Use: For use on metals, plastics and rubbers.

LK495 ( loctite 495 equivalent )

LK495 Super Bonder is a single component, low viscosity, moisture cure, general purpose cyanoacrylate adhesive. 
Typical Use: 
Used as a general purpose adhesive to bond rubber, metal and plastic parts.

LK4210 ( loctite 4210 equivalent )

Part of the family of black toughened, thermally resistant instant adhesives. Low viscosity and thermally resistant up to 120 ° C
Typical Use: Close fitting parts. 

LK496 ( loctite 496 equivalent )

LK496 Super Bonder is a single component, medium viscosity cyanoacrylate adhesive with a moisture cure. 
Typical Use: Used as a general purpose adhesive for bonding plastics, rubbers and metal; particularly suited for bonding metal substrates. 


Please fill out the following application information, contact us with questions
  • Customer No: 
  • Your Email:   
Locate Sales Reps:
  • CALL:+86-574-88381986
  • And access to material safety data sheets, specification sheets, details, and website TDS, MSDS, read the password to download details.
  • FAX:+86-574-83031347
  • EMAIL: mail@luoke.net.cn
Home | Products | News | Download | Service | Job | Contact
Ningbo Locke Glue Industry Co., Ltd. All rights reserved
Address: No.301 west of Jin'gu Middle Road, Yinzhou Investment Industry Zone, Ningbo,China Zip: 315104 Tel :0574-83031346 Fax :0574-83031347 Powered by:BOC